Subject | Text |
| Hmm, I'll gues I mixed up the autocoupler and controller IC, my english isn't a 100 %, sorry :lol: |
ILO LCT32HA36 Repair Help | I'm trying to repair this unit which will power up with the power button. The back light does come |
|
need stepdown from 50v dc OCv to below 25vdc | I am upset, I ordered a solar panel and was sent a COMEPLETELY wrong panel from what i ordered, and |
| it doesn't actually say no disc. i insert dvd, it indexs into position, spins up, stops, spins up, |
Sony STR-DA80ES Receiver – Remote volume control sticking | Hi all.
I have just noticed that when I adjust the volume with the remote control the external volu |
potentiometer / rheostat questions | Hello,
I have some 12 volt DC "rope lights" I am putting in my motor home. I am trying |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
just FYI | If the first poster is still having trouble.. My issue turns out to be the chip located @ D601. Burn |
Sony Plasma PFM42-V1 with double vision | Just had a flood in my house and my semi finished theater room was wrecked. After cleaning everythi |
Philips Service Regarding | I have bought all my home appliances in 2006 when I moved to new house. It costs about 1.7 lac rupee |
| AFTER INSERTING THE DISC SEE IF IT ROTATES, IF IT DOES NOT GIVE IT A NUDGE TO SEE IF IT STARTS TO RO |
| Hi,
Try to get an OEM made (ie. fake!) from your local stores. I got mine at S$5 in Singapore &am |
| [quote:757cf69152="train123"]the voltages around the STR-A6169 controller IC wasn't right [/quote:75 |
HeVi, many thanks for the advice but could you please... | Hi, HeVi,
Many thanks for the advice but could you please clarify...
I'm sorry but I'm a bit thi |
Bauknecht wa725s washing machine problem | Dear sir,
I am writing about an old washing machine named Bauknecht wa725 which I found in the hous |
14PT1532 /94S ctv went off suddenly on service table | this chassis uses
MC44603 AP powersupply
TDA 7056B audio
TDA 8841 S1 signal processor v h |
Insignia IS-DVD1001 DVD/VCR RECORDER SMPS power problem | I have the subject unit which has a bad controller IC in the primary side of the SMPS PCB. I have t |
|
| [quote:c94740fecb="gcastles"]Minnie - attached is a link to what I was calling the controller board. |
panasonic NV-FS100 | Hi,
I am looking for the service manual of the panasonic NV-FS100 VCR. The image is noisy and ver |
| Not familiar with the specific unit but sounds like you may have a spindle motor problem or possibly |
HP W22 | Well, I checked the voltages and found them to be ok, the problem appears to be the video controller |
Samsung CS761BV Blank Screen??? | Hi!
Would anybody be able to help me:
TV as described above - the set goes on and on screen di |
2405FPW D19 zener | The IFR5305S drain should be at 5VDC. I measured this from a properly working monitor. This means a |
Denon CD-player DCD-920 open/close door | When i operate the open/close button onmy Deon CD-player DCD-920 the CD-door opens, en when it is op |
Blaupunkt ist kaput !!! | I have purchased a motor with a Blaupunkt sevilla rd 104 radio/cd.The battery was replaced and I don |
| I had a friend that thought the transistor went bad. He does know a bit about electronics but not s |
LCD (CCFL) Inverter Repair | Hi All,
I'm trying to repair a CCFL Inverter of a FlyBook PC with no success. Can someone have a |
| Ok so now i can get it to come on when i disconnect the PCB Controller board.
The tv will come on a |
Hi to you all newbee on forum would like some help please | Hi all hope you are all well
my problem is i would like to slow down an motor that is 12v and gives |
CD READING PROBLEM | The other gent meant the laser assembly or the motor that spins the disk as being under suspision.
|